|
|
|
|
A.) Pre-Engineered Buildings: The STEEL is a preferred choice for buildings worldwide due to the below key advantages:
Among, the two available options i.e. structural steel & pre-engineered solution, the pre-engineered one stands out as the most optimum and feasible solution due to the fact that by its design & manufacture itself, it creates at-the-least 25% less consumption of material, hence reducing the tonnage and project cost marginally. It demands a specialized approach for the design, detailing, production and installation, which is very professionally handled and executed by us. The various applications of pre-engineered buildings include:
B.) Fencing: This product range deals with various types of fencing systems including the sliding or swinging gates there-in. the manufacturing scope would consist of:
The standard mesh size is 50mm x 50mm which would be manufactured but we have considered and made available to manufacture any other mesh size depending upon the client requirement. The fence fabric either PVC or galvanized would be manufactured in various diameters as per standard market trends or to suit any specific customer requirements. We also cater the manufacture of barbed wire, which would be either PVC or galvanized and it would be manufactured in 2-strand, 4-point barbs with the barb spacing between 75mm – 100mm or suiting any specific client requirement. The fencing post and accessories are enlisted as below which forms the backbone of a quality fencing system. These are selected and designed specifically to suit and stand to the customer requirement and satisfaction.
C.) Cast Aluminium Products: With extensive experience in the fabrication of aluminium and steel-gates for both the commercial & domestic markets, we have specialized in:
We can build virtually anything you require in the way of construction and building aluminium products, even helping with the design process of one of or any specialized products. We have always been in quest for diversification and in this process, apart from our other area of specialty, one of them to point is ornamental aluminium casting. Having a well-equipped cast-aluminium foundry within our workshop and well-versed team of related skillful workers, we provide our customers with the utmost and most innovative ornamental aluminium products. D.) Wrought Iron Products: Having extended our resources & abilities, we have set fourth a wide range of products in this product line.The wrought iron, commercially a pure iron, is having a very small iron content and hence it is tough, malleable, and ductile and can be easily welded. These properties prove it to be the best choice for ornamental iron works. The various products offered vide this range are as follows:
E.) Space Frames: A space-frame is a truss-like, lightweight, rigid structure that is constructed by interlocking struts in a peculiar geometric pattern. Space-frames usually utilize a multidirectional span, and are often used to accomplish long spans with few supports. They derive their strength from the inherent rigidity of the triangular frame. We have a dedicated division, which has been setup to cater the ever-growing demand for space-frames within the Middle-east sectors. We, identify, propose, supply and/or install the space-frame to the specific client requirements. Having the specialized knowledge and expertise in the field along-with strong technological tie-ups we have placed ourselves on the top slot. The space-frames are an increasingly common architectural technique especially for large roof spans in modern commercial & industrial buildings such as:
|
|
© Key Technology Equipment 2005-2006, All rights reserved. International Trademarks are owned by the respective companies. We are using it just as an authorized dealer. |
